[灾难]日立（Hitachi） 酷冰系列 2TB HDS5C3020ALA632
[转]Red Hat Linux 启动流程图
Aug
22
更多硬件信息：
引用
# lspci -v
00:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 36
I/O ports at 4000 [size=256]
Memory at 60075000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 60040000 [size=128K]
Capabilities: [dc] Power Management version 2
00:08.0 VGA compatible controller: Silicon Integrated Systems [SiS] 315PRO PCI/AGP VGA Display Adapter (prog-if 00 [VGA controller])
Subsystem: Unknown device 3030:3030
Flags: bus master, 66MHz, medium devsel, latency 71, IRQ 38
BIST result: 00
Memory at 50000000 (32-bit, prefetchable) [size=256M]
Memory at 60000000 (32-bit, non-prefetchable) [size=256K]
I/O ports at 4800 [size=128]
Expansion ROM at 60060000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
00:0e.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 03)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA
Flags: 66MHz, medium devsel
I/O ports at 4cf0 [size=8]
I/O ports at 4400 [size=256]
I/O ports at 4c80 [size=64]
I/O ports at 4880 [size=128]
I/O ports at 4cc0 [size=32]
00:0e.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01) (prog-if 80 [ Master])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 14
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at 4ce0 [size=16]
00:0e.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 0 1)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 9
I/O ports at 4c00 [size=128]
00:0e.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
Memory at 60072000 (32-bit, non-prefetchable) [size=4K]
00:0e.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02) (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
Memory at 60073000 (32-bit, non-prefetchable) [size=4K]
00:0e.6 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] UDC (rev 02) (prog-if fe [USB Device])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] UDC
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
Memory at 60070000 (32-bit, non-prefetchable) [size=8K]
00:0e.7 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] UOC (rev 02) (prog-if 80 [Unspecified])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] UOC
Flags: 66MHz, medium devsel, IRQ 11
Memory at 60074000 (32-bit, non-prefetchable) [size=4K]
# dmesg
Linux version 2.6.27.7-43 (root@loongson.redflag-linux.com) (gcc version 3.4.6) #1 PREEMPT Tue May 5 23:51:30 CST 2009
busclock=66000000, cpuclock=-2144812480,memsize=256,highmemsize=256
console [early0] enabled
CPU revision is: 00006303 (ICT Loongson-2)
FPU revision is: 00000501
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Determined physical RAM map:
memory: 0000000010000000 @ 0000000000000000 (usable)
memory: 0000000010000000 @ 0000000090000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00028000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x00004000
0: 0x00024000 -> 0x00028000
On node 0 totalpages: 32768
free_area_init_node: node 0, pgdat ffffffff807c7700, node_mem_map 9800000001000000
Normal zone: 32208 pages, LIFO batch:7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32208
Kernel command line: console=tty2 no_auto_cmd root=/dev/hda1 uca=0x50000000,0x1000000
Primary instruction cache 64kB, VIPT, direct mapped, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 512kB 4-way, linesize 32 bytes.
PID hash table entries: 2048 (order: 11, 16384 bytes)
Console: colour dummy device 80x25
console handover: boot [early0] -> real [tty2]
Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
Memory: 504928k/524288k available (4701k kernel code, 18640k reserved, 1236k data, 304k init, 0k highmem)
Calibrating delay loop... 530.43 BogoMIPS (lpj=1060864)
Security Framework initialized
Mount-cache hash table entries: 1024
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Checking for the daddi bug... no.
net_namespace: 1424 bytes
NET: Registered protocol family 16
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: 0000:00:06.0 reg 10 io port: [b100, b1ff]
PCI: 0000:00:06.0 reg 14 32bit mmio: [4075000, 40750ff]
PCI: 0000:00:06.0 reg 30 32bit mmio: [4040000, 405ffff]
pci 0000:00:06.0: supports D1
pci 0000:00:06.0: supports D2
pci 0000:00:06.0: PME# supported from D1 D2 D3hot
pci 0000:00:06.0: PME# disabled
PCI: 0000:00:08.0 reg 10 32bit mmio: [0, fffffff]
PCI: 0000:00:08.0 reg 14 32bit mmio: [4000000, 403ffff]
PCI: 0000:00:08.0 reg 18 io port: [b300, b37f]
PCI: 0000:00:08.0 reg 30 32bit mmio: [4060000, 406ffff]
pci 0000:00:08.0: supports D1
pci 0000:00:08.0: supports D2
PCI: 0000:00:0e.0 reg 10 io port: [b410, b417]
PCI: 0000:00:0e.0 reg 14 io port: [b000, b0ff]
PCI: 0000:00:0e.0 reg 18 io port: [b380, b3bf]
PCI: 0000:00:0e.0 reg 20 io port: [b280, b2ff]
PCI: 0000:00:0e.0 reg 24 io port: [b3c0, b3df]
PCI: 0000:00:0e.2 reg 20 io port: [b400, b40f]
PCI: 0000:00:0e.3 reg 10 io port: [b200, b27f]
cs5536 acc latency 0
PCI: 0000:00:0e.4 reg 10 32bit mmio: [4074000, 4074fff]
PCI: 0000:00:0e.5 reg 10 32bit mmio: [4073000, 4073fff]
PCI: 0000:00:0e.6 reg 10 32bit mmio: [4070000, 4071fff]
PCI: 0000:00:0e.7 reg 10 32bit mmio: [4072000, 4072fff]
bus: 00 index 0 io port: [4000, ffff]
bus: 00 index 1 mmio: [50000000, 7fffffff]
slot: 6, pin: 1, irq: 36
slot: 8, pin: 1, irq: 38
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
IP route cache hash table entries: 4096 (order: 1, 32768 bytes)
TCP established hash table entries: 16384 (order: 4, 262144 bytes)
TCP bind hash table entries: 16384 (order: 3, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
msgmni has been set to 987
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
rtc: SRM (post-2000) epoch (2000) detected
Real Time Clock Driver v1.12ac
sisfb: Video ROM not found
sisfb: Video RAM at 0x50000000, mapped to 0x9000000050000000, size 32768k
sisfb: MMIO at 0x60000000, mapped to 0x9000000060000000, size 256k
sisfb: Memory heap starting at 32160K, size 32K
sisfb: Detected SiS301C video bridge
sisfb: CRT1 DDC probing failed
sisfb: Default mode is 800x600x8 (60Hz)
sisfb: Initial vbflags 0x10000020
Console: switching to colour frame buffer device 100x37
sisfb: 2D acceleration is enabled, y-panning enabled (auto-max)
fb0: SiS 315PRO frame buffer device version 1.8.9
sisfb: Copyright (C) 2001-2005 Thomas Winischhofer
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:0e.2: UDMA100 controller
amd74xx 0000:00:0e.2: IDE controller (0x1022:0x209a rev 0x01)
amd74xx 0000:00:0e.2: IDE port disabled
amd74xx 0000:00:0e.2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4ce0-0x4ce7
Probing IDE interface ide0...
hda: Hitachi HTS541612J9AT00, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
hda: max request size: 512KiB
hda: 234441648 sectors (120034 MB) w/7512KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
ide-floppy driver 1.00
Driver 'sd' needs updating - please use bus_type methods
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methods
PCI: Setting latency timer of device 0000:00:0e.5 to 64
ehci_hcd 0000:00:0e.5: EHCI Host Controller
ehci_hcd 0000:00:0e.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.5: irq 11, io mem 0x60073000
ehci_hcd 0000:00:0e.5: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Setting latency timer of device 0000:00:0e.4 to 64
ohci_hcd 0000:00:0e.4: OHCI Host Controller
ohci_hcd 0000:00:0e.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.4: irq 11, io mem 0x60072000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042.c: No controller found.
Trying to free nonexistent resource <0000000000000060-000000000000006f>
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
begin to find the vga mem range
find the frame buffer:start=50000000,end=2000000
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 304k freed
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: USB Keyboard as /class/input/input0
input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:0e.4-1
input: USB Keyboard as /class/input/input1
input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:0e.4-1
usb 2-2: new low speed USB device using ohci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0e.4-2
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
eth0: RTL8169sc/8110sc at 0x9000000060075000, 00:11:11:11:17:f0, XID 18000000 IRQ 36
PCI: Setting latency timer of device 0000:00:0e.3 to 64
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on hda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1020080k swap on /dev/hda3. Priority:-1 extents:1 across:1020080k
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
warning: `avahi-daemon' uses deprecated v2 capabilities in a way that may be insecure.
NET: Registered protocol family 10
fuse init (API version 7.9)
ioctl32(X:1509): Unknown cmd fd(6) cmd(8004f300){t:'?;sz:4} arg(7fb05364) on /dev/fb0
ioctl32(X:1509): Unknown cmd fd(6) cmd(80046ef8){t:'n';sz:4} arg(0063d940) on /dev/fb0
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
00:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 36
I/O ports at 4000 [size=256]
Memory at 60075000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 60040000 [size=128K]
Capabilities: [dc] Power Management version 2
00:08.0 VGA compatible controller: Silicon Integrated Systems [SiS] 315PRO PCI/AGP VGA Display Adapter (prog-if 00 [VGA controller])
Subsystem: Unknown device 3030:3030
Flags: bus master, 66MHz, medium devsel, latency 71, IRQ 38
BIST result: 00
Memory at 50000000 (32-bit, prefetchable) [size=256M]
Memory at 60000000 (32-bit, non-prefetchable) [size=256K]
I/O ports at 4800 [size=128]
Expansion ROM at 60060000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
00:0e.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 03)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA
Flags: 66MHz, medium devsel
I/O ports at 4cf0 [size=8]
I/O ports at 4400 [size=256]
I/O ports at 4c80 [size=64]
I/O ports at 4880 [size=128]
I/O ports at 4cc0 [size=32]
00:0e.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01) (prog-if 80 [ Master])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 14
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at 4ce0 [size=16]
00:0e.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 0 1)
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 9
I/O ports at 4c00 [size=128]
00:0e.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
Memory at 60072000 (32-bit, non-prefetchable) [size=4K]
00:0e.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02) (prog-if 20 [EHCI])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
Memory at 60073000 (32-bit, non-prefetchable) [size=4K]
00:0e.6 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] UDC (rev 02) (prog-if fe [USB Device])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] UDC
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
Memory at 60070000 (32-bit, non-prefetchable) [size=8K]
00:0e.7 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] UOC (rev 02) (prog-if 80 [Unspecified])
Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] UOC
Flags: 66MHz, medium devsel, IRQ 11
Memory at 60074000 (32-bit, non-prefetchable) [size=4K]
# dmesg
Linux version 2.6.27.7-43 (root@loongson.redflag-linux.com) (gcc version 3.4.6) #1 PREEMPT Tue May 5 23:51:30 CST 2009
busclock=66000000, cpuclock=-2144812480,memsize=256,highmemsize=256
console [early0] enabled
CPU revision is: 00006303 (ICT Loongson-2)
FPU revision is: 00000501
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Determined physical RAM map:
memory: 0000000010000000 @ 0000000000000000 (usable)
memory: 0000000010000000 @ 0000000090000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00028000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x00004000
0: 0x00024000 -> 0x00028000
On node 0 totalpages: 32768
free_area_init_node: node 0, pgdat ffffffff807c7700, node_mem_map 9800000001000000
Normal zone: 32208 pages, LIFO batch:7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32208
Kernel command line: console=tty2 no_auto_cmd root=/dev/hda1 uca=0x50000000,0x1000000
Primary instruction cache 64kB, VIPT, direct mapped, linesize 32 bytes.
Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 512kB 4-way, linesize 32 bytes.
PID hash table entries: 2048 (order: 11, 16384 bytes)
Console: colour dummy device 80x25
console handover: boot [early0] -> real [tty2]
Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
Memory: 504928k/524288k available (4701k kernel code, 18640k reserved, 1236k data, 304k init, 0k highmem)
Calibrating delay loop... 530.43 BogoMIPS (lpj=1060864)
Security Framework initialized
Mount-cache hash table entries: 1024
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Checking for the daddi bug... no.
net_namespace: 1424 bytes
NET: Registered protocol family 16
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: 0000:00:06.0 reg 10 io port: [b100, b1ff]
PCI: 0000:00:06.0 reg 14 32bit mmio: [4075000, 40750ff]
PCI: 0000:00:06.0 reg 30 32bit mmio: [4040000, 405ffff]
pci 0000:00:06.0: supports D1
pci 0000:00:06.0: supports D2
pci 0000:00:06.0: PME# supported from D1 D2 D3hot
pci 0000:00:06.0: PME# disabled
PCI: 0000:00:08.0 reg 10 32bit mmio: [0, fffffff]
PCI: 0000:00:08.0 reg 14 32bit mmio: [4000000, 403ffff]
PCI: 0000:00:08.0 reg 18 io port: [b300, b37f]
PCI: 0000:00:08.0 reg 30 32bit mmio: [4060000, 406ffff]
pci 0000:00:08.0: supports D1
pci 0000:00:08.0: supports D2
PCI: 0000:00:0e.0 reg 10 io port: [b410, b417]
PCI: 0000:00:0e.0 reg 14 io port: [b000, b0ff]
PCI: 0000:00:0e.0 reg 18 io port: [b380, b3bf]
PCI: 0000:00:0e.0 reg 20 io port: [b280, b2ff]
PCI: 0000:00:0e.0 reg 24 io port: [b3c0, b3df]
PCI: 0000:00:0e.2 reg 20 io port: [b400, b40f]
PCI: 0000:00:0e.3 reg 10 io port: [b200, b27f]
cs5536 acc latency 0
PCI: 0000:00:0e.4 reg 10 32bit mmio: [4074000, 4074fff]
PCI: 0000:00:0e.5 reg 10 32bit mmio: [4073000, 4073fff]
PCI: 0000:00:0e.6 reg 10 32bit mmio: [4070000, 4071fff]
PCI: 0000:00:0e.7 reg 10 32bit mmio: [4072000, 4072fff]
bus: 00 index 0 io port: [4000, ffff]
bus: 00 index 1 mmio: [50000000, 7fffffff]
slot: 6, pin: 1, irq: 36
slot: 8, pin: 1, irq: 38
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
IP route cache hash table entries: 4096 (order: 1, 32768 bytes)
TCP established hash table entries: 16384 (order: 4, 262144 bytes)
TCP bind hash table entries: 16384 (order: 3, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
msgmni has been set to 987
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
rtc: SRM (post-2000) epoch (2000) detected
Real Time Clock Driver v1.12ac
sisfb: Video ROM not found
sisfb: Video RAM at 0x50000000, mapped to 0x9000000050000000, size 32768k
sisfb: MMIO at 0x60000000, mapped to 0x9000000060000000, size 256k
sisfb: Memory heap starting at 32160K, size 32K
sisfb: Detected SiS301C video bridge
sisfb: CRT1 DDC probing failed
sisfb: Default mode is 800x600x8 (60Hz)
sisfb: Initial vbflags 0x10000020
Console: switching to colour frame buffer device 100x37
sisfb: 2D acceleration is enabled, y-panning enabled (auto-max)
fb0: SiS 315PRO frame buffer device version 1.8.9
sisfb: Copyright (C) 2001-2005 Thomas Winischhofer
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:0e.2: UDMA100 controller
amd74xx 0000:00:0e.2: IDE controller (0x1022:0x209a rev 0x01)
amd74xx 0000:00:0e.2: IDE port disabled
amd74xx 0000:00:0e.2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4ce0-0x4ce7
Probing IDE interface ide0...
hda: Hitachi HTS541612J9AT00, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
hda: max request size: 512KiB
hda: 234441648 sectors (120034 MB) w/7512KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
ide-floppy driver 1.00
Driver 'sd' needs updating - please use bus_type methods
SCSI Media Changer driver v0.25
Driver 'ch' needs updating - please use bus_type methods
PCI: Setting latency timer of device 0000:00:0e.5 to 64
ehci_hcd 0000:00:0e.5: EHCI Host Controller
ehci_hcd 0000:00:0e.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.5: irq 11, io mem 0x60073000
ehci_hcd 0000:00:0e.5: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Setting latency timer of device 0000:00:0e.4 to 64
ohci_hcd 0000:00:0e.4: OHCI Host Controller
ohci_hcd 0000:00:0e.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.4: irq 11, io mem 0x60072000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042.c: No controller found.
Trying to free nonexistent resource <0000000000000060-000000000000006f>
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
begin to find the vga mem range
find the frame buffer:start=50000000,end=2000000
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 304k freed
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: USB Keyboard as /class/input/input0
input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:0e.4-1
input: USB Keyboard as /class/input/input1
input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:0e.4-1
usb 2-2: new low speed USB device using ohci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0e.4-2
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
eth0: RTL8169sc/8110sc at 0x9000000060075000, 00:11:11:11:17:f0, XID 18000000 IRQ 36
PCI: Setting latency timer of device 0000:00:0e.3 to 64
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on hda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1020080k swap on /dev/hda3. Priority:-1 extents:1 across:1020080k
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
warning: `avahi-daemon' uses deprecated v2 capabilities in a way that may be insecure.
NET: Registered protocol family 10
fuse init (API version 7.9)
ioctl32(X:1509): Unknown cmd fd(6) cmd(8004f300){t:'?;sz:4} arg(7fb05364) on /dev/fb0
ioctl32(X:1509): Unknown cmd fd(6) cmd(80046ef8){t:'n';sz:4} arg(0063d940) on /dev/fb0
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
系统参数：
内文分页： [1] [2]
